What causes low water pressure in the shower?

Luxivai· 0 views

The shower has slowly gone from strong to a weak dribble over a few months. The kitchen tap seems fine. What could be causing it, and what can I check myself first?

2 Answers

When only one outlet is weak, the cause is usually at that outlet rather than the mains supply. Work through these in order:

  • Blocked shower head: mineral build-up clogs the nozzles over time, especially in hard-water areas. Unscrew the head and soak it in white vinegar for a few hours, then scrub the nozzles. This alone fixes a lot of weak showers.
  • Flow restrictor: water-saving heads have a restrictor disc that can clog with debris. It can be cleaned, but shouldn't be removed, as water efficiency rules apply in many areas.
  • Mixer cartridge or valve: a worn or partly blocked cartridge in the mixer limits flow. If hot is weak but cold is strong, the problem may be on the hot side, including the hot water system's tempering valve.
  • Pipework: older galvanised pipes corrode inside and slowly narrow. That tends to affect several outlets, not one.

If cleaning the head doesn't help, a plumber can test the pressure at the meter and at the outlet to show where the drop is happening, which avoids replacing parts on guesswork.

0
Gagan Kohli

A zip-lock bag of vinegar tied around the shower head overnight works if you can't get it off. Rinse it well in the morning before using it.

0