Why does my safety switch keep tripping?

Luxivai· 1 views

The safety switch trips every few days, sometimes at night when nothing much is on. Flicking it back up works for a while. What's going on, and is it safe to keep resetting it?

3 Answers

A safety switch (RCD) trips when it detects current leaking to earth, which is exactly its job. Repeated tripping means something on that circuit is leaking, and it's worth finding rather than just resetting.

How to narrow it down:

  1. Unplug everything on the affected circuit, then reset the switch.
  2. Plug appliances back in one at a time, waiting a while between each. If it trips when a particular one is connected or switched on, you've found the culprit. Kettles, toasters, old fridges, heaters and outdoor equipment are common offenders.
  3. Think about timing: tripping at night or after rain often points to moisture, such as an outdoor power point, garden lighting, a pool pump or a cracked outdoor fitting.
  4. If it trips with nothing plugged in, the fault is in the fixed wiring or a light fitting, and that's a job for a licensed electrician.

Never bridge or remove a safety switch to stop it tripping. If it trips immediately every time you reset it, leave it off and call an electrician. They can test the insulation on each circuit to find exactly where the leak is.

0
Proptez

In rentals, a safety switch that keeps tripping should be reported to the property manager straight away. Electrical faults are generally treated as urgent repairs.

0
Gagan Kohli

Ours turned out to be an old outdoor power point that filled with water every time it rained. A weatherproof cover fixed it, and the electrician took ten minutes to find it once we'd noticed the rain pattern.

0